Product Introduction

The Radial steel gate is mainly composed of three parts: rotating door body, buried components and hoisting equipment. This product does not have a door slot, and the opening and closing force is relatively small compared to other products, but the mechanical conditions are good, and it can be used as a working gate on various waterways.

There are many ways to classify Radial steel gate

1. According to the shape of the support hinge shaft, it can be divided into circular hinge, conical hinge, spherical hinge, etc .; the conical hinge has a simple structure, and it is convenient to manufacture and install. on;

2. According to the depth of the water level, it can be divided into an open top type and a diving type;

3. Driving according to the force transmission arm can be straight arm type and inclined arm type; in the process of use, the former is mostly used for the empty with a smaller wide mouth, and the latter is used for the hole with a larger wide mouth.

Product component

Radial steel gate is mainly composed of four parts: door leaf, support hinge, water stop device and support arm. The support arm can be divided into straight support arm and inclined support arm. The support hinges operate flexibly and the installation position should be higher than the downstream water surface.

http://www.cngatehoist.com/